Cooking is one of the most demanding tasks at home. This is not only due to all the processes involved, such as selecting the necessary ingredients, purchasing them, cutting or chopping them and starting to prepare them; but also because of all the subsequent cleaning processes or the complexity of carrying out all these tasks when you don’t have much time for them.
For this reason, many people resort to methods that simplify the procedure, such as purchasing microwaveable foods, which only require a few minutes of cooking, or letting dishes cook slowly in the oven while other tasks are carried out at home.
The latter option is very common and makes the oven an essential appliance in daily cooking processes at home. However, continued use and wear and tear could be fatal if not treated properly, significantly reducing its useful life.
Regular cleaning is essential for meals to be as tasty as possible and can also be achieved with products for daily use at home. It is therefore important to know some tips for cleaning the double oven window without having to dismantle it.
How to clean the double oven window without having to dismantle it
Most ovens have double glass doors, one facing the outside of the kitchen and the other facing the interior of the appliance. However, between the two surfaces it is common to find a space in which grease, condensation and food remains regularly accumulate, thus deteriorating its aesthetics and function.
It is essential to clean these holes to extend the useful life of the kitchen appliance, although it is not a simple task, since it can also vary depending on the model. Therefore, before starting cleaning, check your model and make sure the oven is completely cool to be able to carry out the process safely.
Once the area is secure, begin mixing baking soda with water until it forms a paste. Then apply it to interior and exterior surfaces and leave it on for half an hour. Then use a damp scrubbing sponge or microfiber cloth to remove all the excess. Complete this part of the cleaning by wiping the surfaces with a dry cloth or piece of paper towel without applying excessive pressure to remove moisture and ensure that no water marks remain on the glass.
Once both areas have been disinfected, it will be time to treat the space between the two surfaces. To do this, check if your oven has a hole through which a tool can enter; This opening is usually located at the bottom of the door, so you may need to unhook it from the rest of the appliance.
When you see the hole, line a wooden spatula, ruler or any tool that is long and thin enough with a microfiber cloth or damp cloth. Then secure the covering with rope or adhesive tape until you verify that it does not come off the pushing surface.
Spray white cleaning vinegar on the tool and insert it into the hole. After that, rub the inside of both crystals with gentle movements and in all possible directions until you achieve the desired result. It is important to be patient and scrub slowly to prevent any part of the improvised utensil from coming loose.
On the other hand, if the oven door does not have an opening, there may be no other choice than to remove the screws from the door to remove the two panes of glass and then be able to scrub manually. This option will allow for easier cleaning, although the subsequent disassembly and assembly process may take a few hours depending on the model and available tools.
How to clean the rest of the oven parts
Once the oven door is disinfected, you can take the opportunity to clean the rest of the parts of the appliance. To do this, use the mixture of baking soda and water prepared previously and spread it on the walls of the oven, avoiding covering the resistance and the fans.
After that, let it sit for a few hours until the mixture is completely dry and finish by spraying white cleaning vinegar onto the hardened paste. Once all products have worked, scrub with a scrubbing sponge or damp microfiber cloth to remove any excess residue.
Soak the trays and racks in hot water with white vinegar for half an hour. Then scrub with a scrubbing pad or wire brush to remove all dirt. Finally, allow all parts to dry before putting the device back into service.
