The attempt to start the car and finding it without a battery is something that has happened to many drivers on certain occasions, and it can happen to us again as long as there are combustion cars. It’s best to choose to bring a set of pliers whenever possible, as they will cost a little over a dozen dollars and can save us some money.
Let’s look at the methods for starting a car without a battery:
Use a starter
This is one of the few methods to automatically start the car. The starter is a device which will be connected to the battery terminals and which provides a high intensity electrical impulse so that the car can start.
These are devices that cost between seventy and one hundred euros. They have a few small size tweezerswith the cables and they work perfectly. Simply connect each pole to the correct terminal and turn on the vehicle’s ignition.
Start with an external battery
A variation of the previously mentioned method that will work with both manual and automatic vehicles. You’re looking for any battery-operated tool, like a drill. Each pole is then connected to any other electrically conductive element.
Once the first step has been completed, all you have to do is touch each pole of the terminal that corresponds to the battery. After turn the ignitionthe car should start without problem.
Vehicle thrust
It can be dragged to reinforce starting, provided you have a manual transmission. We are talking about one of the most popular methods to start the car, although it will only work with manual vehicles.
How to start the vehicle this way?
Turn the car on and turn the key a first half turn, then put the car in neutral and release the handbrake.
Take the car, on the one hand, which is comfortable and which will not be mobile, starting to drag the vehicle. If they help you, even better..
When the vehicle gains some momentum, you need to jump in the car, press the clutch, engage first gear and suddenly release the clutch. If you don’t succeed with the first, you can do it with the second.
If the ground is wet, this can be done in third gear, although it will cost you a lot more. After releasing the pedal, the car should start. Remember to lower the clutch again so it doesn’t stall.
Throw the car down a slope
When the vehicle is pulled up a slope or pushed, it is possible to start the car without involving the battery. Another option is to go down the slope, but with caution. This can be helpful when you don’t feel capable of doing it yourself or lack help.
Start of rope
A method that is not very well known and as such can be dangerous, but it will be the last option you have in an emergency.
The principle is similar to using brush cutters or chainsaws equipped with a gasoline engine. The goal is to turn the starter using one of the wheels, although this will only work on vehicles with a manual transmission. We will need to do the following:
- The car is raised using a jack so that one of the drive wheels is suspended in the air and the brake is applied.
- You wrap the rope or fabric around the tire, as if you were throwing a condom.
- When you have a rope in one, you must have one of the safety belts with a knife. The band should allow the wheel to turn in the natural direction.
- You put the key in the ignition and turn it half a turn, but it won’t start.
- Second gear is engaged and all non-essential electrical systems are disconnected.
- The rope is pulled with force. It’s not something that works the first time, but after several tries the car should start. The wheel can be turned outwards for easier maneuvering.
After everything we have talked about, here are the most interesting methods to start the car without using the battery. Now it’s your turn to choose the method that seems most interesting to you, or the easiest to put into practice. Good luck with your choice.
